Mounting OS6855-14/P14 and OS6855-U10 Switches Rack-Mounting OS6855-14/P14 and OS6855-U10 Switches
OmniSwitch 6855 Series Hardware Users Guide
September 2011
page 4-11
17
Install one cord retainer bracket to the back of each installed power supply using the attachment screws
(provided). Once all retainer clips are attached, place the slotted retainer clip over the bracket with the
retainer fingers pointing down and slide the retainer bracket toward the power supply until it meets the
power cord connector. Insert two screws (provided) into the retainer clip slots and tighten until secure.
Power Cord Retainer Clip Assembly
18
Now that the chassis and power supply tray(s) are assembled, mark the holes on the rack where the
switch assembly is to be installed.
19
Using one additional person, lift and position the chassis/power supply assembly on the rack until the
rack-mount flanges are flush with the rack post.
20
Align the holes in the flanges with the rack holes that were marked in step 18.
Retainer bracket
Slotted retainer clip
Power cord connector
Power supply
