Mounting OS6855-14/P14 and OS6855-U10 Switches Table-Mounting OS6855-14/P14 and OS6855-U10 Switches
OmniSwitch 6855 Series Hardware Users Guide
September 2011
page 4-21
2
Next, insert the two tabs at the base of the power supply tray into the slots provided at the bottom-rear
portion of the switch chassis. Secure the power supply tray to the rear of the chassis using the attachment
screws (provided).
3
Plug the connector cable from your power supply into the PS1 port located in the back of the switch
chassis, as shown.
4
If no additional power supplies are required, skip to step 5. Otherwise, refer to the additional
information on the following configurations: redundant chassis power, PoE, and redundant chassis power
with PoE
.
Insert tab
Insert tab
Connector cable
Rear of chassis
PS1 port
