E 70
Pump running-in for
ATP 80, ATP 100, ATP 150, ATP 400
Alcatel Vacuum Technology France - ATP User’s Manual
3/3
GB 00443 - Edition 02 - February 99
During the running-in cycles:
- the START / STOP / STANDBY keys are deactivated;
- access to the
SETUP
menu is impossible;
- access to the
DISPLAY
menu is possible.
We advise you against stopping the running-in procedure.
The controller displays:
and the program is stopped. Remedy to the problem and
start again the running-in operation.
PROG 2
FAULT
PH 1
CYCLE 2
If a problem occurs during
running-in
The controller displays:
and the Standby indicator light is lit on. The running-in
operation has been stopped and
it must be started again
.
5600H
ORPM
READY TO START !
If a power failure occurs
during running-in
