B 70
ACT 200 T and ACT 600 T
controller start-up
Alcatel Vacuum Technology France - ATP User’s Manual
1/4
GB 00415 - Edition 02 - Feburary 99
Enter the sub-menus by
pressing
The controller performs a
self-test and identifies the
pumps to which it can be
connected.
The initialization time is
approximately 12 seconds.
Display initialization
Indicator light test:
they are lit in succession.
The equipment is identified :
the programs versions are
displayed.
The pump operation time and
the speed are displayed.
ATP 80/100
VV:1.10 VE:1.10
52H ORPM
READY TO START!
■■■■■■■■■■■■■■■■
■■■■■■■■■■■■■■■■
FAULT
Configure the parameters
for the application using
the various menus
Parameter setting
access
Selection
Validation
• used to access the parameter setting mode.
• used to exit the various menus without validating the functions.
• used to move in the menus, or
from one parameter to another.
• used to select or adjust the value of the selected parameter.
• used to validate the selection of a menu, parameter or
value.
• used to exit the menus and return to the pump parameter
display (on ACT 600 T ).
The parameter setting keys
PREVIOUS
ENTER
STATUS
PREVIOUS
➧
Access the
parameter
programming.
➧
Select a running-in
cycle;
➧
Start the cycle.
Once the various electrical connections have been made, set
the main switch on the rear panel to "
I
".
➧
Display the monitored
parameters.
➧
List the faults and the
alerts.
DISPLAY SETUP
RUNNING IN
