manualshive.com logo in svg

Alcatel-Lucent OmniTouch Fax Server Application, System Administrator Manual

Share
Download
Alcatel-Lucent OmniTouch Fax Server Application System Administrator Manual Download Page 99

Chapter 5 Web Administrator: System Monitoring

OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01

99

The 

Fax Properties

 window appears. The information is only 

displayed and cannot be modified.

 

3 Click  the 

More 

button to view the 

Error Code

 and 

Solution

. 

There are three levels of 

Error Description

:

 

 

Error Description

Administrator Level Information

The information includes an error code and a more 
precise description of the problem and a proposed 
solution. 

Low Level Information

The information is a low level description of the above 
error. This message is generated by the component that 
generated the error and details more information 
regarding the problem. The information is of a 
technical nature and is useful for support purposes.

User Level Information

The information includes an error code describing a 
generic message and a proposed solution.

Summary of Contents for OmniTouch Fax Server Application











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands