Chapter 4 Web Administrator: System Configuration
62
OmniTouch Fax Server System Administrator Guide - 8AL_90215_USAA ed.01
3 If you are using the H.323 protocol, the local Q931 port is 1720.
Enter a new port if the gateway is changed.
4 The local RAS port is 1718.
Enter a new port if the gateway is changed.
5 Select the
H.323
Messages
option to write those messages to
the OmniTouch Fax Server driver log files.
6 If you are using the SIP protocol, the default port is 5060.
Enter a new port if the gateway is changed.
7 Select the
SIP
Messages
option to write those messages to
the OmniTouch Fax Server driver log files.
8 In the
Option
section, select
Enable ECM
to enable error
correction mode.
Error correction modes provides message redundancy and a means of
recovering lost packets in transmissions between the gateway and
the OmniTouch Fax Server driver.
9 In the
Received Document Encoding
field, select
Group 4 (2d)
or
Group 3 (1d)
.
Group 4
is the default value.
10 Select the
Terminal Resolution Capacity
, either
Low
(200x100)
,
High (200x200)
,
Fine (300x300)
or
Ultra Fine
(400x400)
.
High
is the default value.
11 Click
OK
.
