52
Version 1.00
INPUT ROUTING
Should you wish to reset the input routing to the default setting, press the RESET key. The input
selection and track routings you make can be saved as part of the system settings when you save
them (see SYSTEM - SETTINGS).
Of course, depending on your system, you may have more or less analogue and/or digital inputs.
The procedure is exactly the same, however, regardless of system configurations.
RECORDING DIGITALLY
When recording digitally, the machine must synchronise to that digital audio signal’s wordclock. If
you have selected a digital input to record through in the ROUTE INPUT page, the input will
usually be selected automatically as the wordclock source by the machine as soon as you select
a track routed to that input for record.
If, for some reason, you select to record digitally but a digital input is not connected, as soon as
you try to select a track (or tracks) for record, you will get the prompt:
You will not be able to select any tracks for record until the problem has been fixed. Please check
your digital audio connections.
This message will also be shown if the digital audio signal gets disconnected or you select another
digital input that has no connection.
If you are in the process of recording when this happens, the system will stop recording and
playback. Please check your connections.
Summary of Contents for RE32
Page 10: ...Page ix ...
