manualshive.com logo in svg

Akai RE32, Operator'S Manual

The Akai RE32 Operator's Manual is a comprehensive guide that ensures seamless user experience with this exceptional product. Offering step-by-step instructions, troubleshooting tips, and advanced features, this manual is available for free download at manualshive.com, providing users with easy access to unlock the full potential of their Akai RE32.

Share
Download
background image

Version 1.00

47

INPUT ROUTING

INPUT ROUTING - ASSIGNING INPUTS TO TRACKS

Depending on the specification of the machines in the system, there may be more tracks than
there are inputs so some way of assigning the inputs to tracks is needed. This is achieved from the
ROUTE INPUTS page which is accessed by pressing F5/F6 (ROUTE INPUTS) on the main record
page.

The first screen shown allows you to select the machine for which you would like to configure the
input assignments:

Select the required machine using the DATA ENTRY +/- keys. As you select each machine, the
display will show the track numbers assigned to that machine to avoid any confusion.

Pressing the EXECUTE will take you to the main routing assignment page. This will vary depending
on the type of machine selected.

Summary of Contents for RE32

































































































































































































Reviews:

No comments

Related manuals for RE32

Warner Electric MCS202-E1 User Manual preview
MCS202-E1
Brand: Warner Electric Pages: 3
iCeeO2 C30 Instruction Manual preview
C30
Brand: iCeeO2 Pages: 7
SABAF 10 Instructions For Use, Maintenance Instructions preview
10
Brand: SABAF Pages: 6
Danfoss 103E7 Installation & User'S Instructions preview
103E7
Brand: Danfoss Pages: 24
Ebyte E180-Z5812SP Product Manual preview
E180-Z5812SP
Brand: Ebyte Pages: 35
Ultra Start 15 SERIES Install Manual preview
15 SERIES
Brand: Ultra Start Pages: 24
nekos SKY 650 Manual For Installation And User Manual preview
SKY 650
Brand: nekos Pages: 8
nekos SKY 450 Installation And Use Manual preview
SKY 450
Brand: nekos Pages: 8
Neles PB2 Series Installation Maintenance And Operating Instructions preview
PB2 Series
Brand: Neles Pages: 12
Yamaha RCX340 Service Information preview
RCX340
Brand: Yamaha Pages: 5
Yamaha ACD1 Owner'S Manual preview
ACD1
Brand: Yamaha Pages: 20
Yamaha DCP4S-EU Owner'S Manual preview
DCP4S-EU
Brand: Yamaha Pages: 2
GEA VESTA Operating Instructions Manual preview
VESTA
Brand: GEA Pages: 47
C&C Atlas Series Installation, Operation And Maintenance Manual preview
Atlas Series
Brand: C&C Pages: 17
ICP DAS USA XP-9 88-IoT Series Quick Start Manual preview
XP-9 88-IoT Series
Brand: ICP DAS USA Pages: 8
ICON AIRFLOW PCM Manual preview
AIRFLOW PCM
Brand: ICON Pages: 2
ICP DAS USA SP-S2-DS Quick Start preview
SP-S2-DS
Brand: ICP DAS USA Pages: 4
Mitsubishi AL-ASI-BD Hardware Manual preview
AL-ASI-BD
Brand: Mitsubishi Pages: 16

Brands by name

Popular brands

Load more brands