manualshive.com logo in svg

Akai RE32, Operator'S Manual

The Akai RE32 Operator's Manual is a comprehensive guide that ensures seamless user experience with this exceptional product. Offering step-by-step instructions, troubleshooting tips, and advanced features, this manual is available for free download at manualshive.com, providing users with easy access to unlock the full potential of their Akai RE32.

Share
Download
background image

160

Version 1.00

SYSTEM SETUP

EBU 25fps (+4%) - This special selection should be made when working
with video material that has been derived from a frame-by-frame transfer
from 24 fps film to 25 fps video. When material is transferred in this way,
the visuals will actually run 4.1% faster when played from the video. As
a result, the system needs to playback audio with the same speed offset
in order to maintain sync.

This selection should be used when working with material that has been
transferred from film in this way. Whilst working with the video, the audio
will play back slightly faster and may sound unnatural but this is not a
problem as, ultimately, the audio will be played back synced to the master
film at 24fps at which point, correct playback speed will be restored.

NOTE 1: It is not possible to record audio when synchronised to this selection.

NOTE 2: You must select 25fps (+4.1%) as the time display style - see below.

SMPTE/EBU+RS422 - These options are available at all frame rates
and are for use with RS422 equipped VTRs when the selected machine
is acting as an RS422 master controller (i.e. when all playback, locating,
jogging, etc., of both the selected machine and VTR are controlled from
the RE32). SMPTE/EBU from the VTR is still connected as usual via the
EXT. TIME input and the ON-LINE key must be switched on. The selected
machine will receive timecode information in playback from the LTC
connection but, when working in slow motion, it receives timecode over
RS422 making locking of the two machines tighter.

NOTE: The SMPTE+RS422 selection described above MUST be used when using the selected
machine as an RS422 master.

SMPTE/EBU+VITC - These options are available on the DD1500 only
(at all frame rates) and allow the DD1500 to follow SMPTE/EBU timecode
as normal during playback but, during extremely slow motion playback
or jogging, the DD1500 automatically switches to VITC for better slow
motion lock between the machines. Naturally, both the LTC and VITC
inputs must be used when this timecode selection is made.

NOTE: When the DD1500 switches to VITC at very, very slow jog speeds, you will not hear
audio as you jog but you will notice improvements in the accuracy of frame locking at such
slow speeds.

RS422 - It is also possible to synchronise the selected machine to
timecode over RS422 only and all frame rates are supported. However,
you will note that this is primarily of use when using the system with a
non-linear video recorder (see the section that explains the RS422
functions for more details on this).

Summary of Contents for RE32

































































































































































































Reviews:

No comments

Related manuals for RE32

E-fly 100C Operating Manual preview
100C
Brand: E-fly Pages: 16
Eaton TS110 Product Manual preview
TS110
Brand: Eaton Pages: 28
Parallel Galleon Installation Manual preview
Galleon
Brand: Parallel Pages: 16
V2 EASY Series Manual preview
EASY Series
Brand: V2 Pages: 46
Fancom 743 Installer Manual preview
743
Brand: Fancom Pages: 31
3M SST Manual preview
SST
Brand: 3M Pages: 90
Zeta Premier MX-16 Installation And Commissioning Manual preview
Premier MX-16
Brand: Zeta Pages: 44
Zamel Extra Free RZB-02 Quick Manual preview
Extra Free RZB-02
Brand: Zamel Pages: 2
Yamaha DCP4S-US Owner'S Manual preview
DCP4S-US
Brand: Yamaha Pages: 2
Tylo 2900 5208 Installation Manual And Quick Start Manual preview
2900 5208
Brand: Tylo Pages: 51
Klimaire KUMR-903 Operation Manual preview
KUMR-903
Brand: Klimaire Pages: 5
Samson 3251-E Mounting And Operating Instructions preview
3251-E
Brand: Samson Pages: 102
XtendLan KEYBPTZ4D Operating Instructions Manual preview
KEYBPTZ4D
Brand: XtendLan Pages: 12
ZBA ZZB88-441S User Manual preview
ZZB88-441S
Brand: ZBA Pages: 27
M-system R7C-RS4 Instruction Manual preview
R7C-RS4
Brand: M-system Pages: 10
Seiko G1216B1N000 User Manual preview
G1216B1N000
Brand: Seiko Pages: 30
Waeco ASC G Wi-Fi kit Operating Manual preview
ASC G Wi-Fi kit
Brand: Waeco Pages: 386
Water Specialist WS1TT Drawings And Service Manual preview
WS1TT
Brand: Water Specialist Pages: 36

Brands by name

Popular brands

Load more brands