Version 1.00
43
RECORDING
RECORD SETUP
It is possible to select certain other options relating to recording in the RECORD SETUP page.
This is accessed by pressing SETUP (F3/F4) from the main record page:
The parameters are:
CROSSFADE
This allows a record crossfade of 0 to 80ms to be set.
AUTO MONITOR
Here you may select how you will monitor the input signal. The default
selection is RECORD AND STOP. With this selected, you will hear the
input signal under the following conditions:
HEAR INPUT?
RECORD
STOP
PLAYBACK
YES
NO
YES
RECORD TRACK'S PLAY SELECT KEY ON
RECORD
STOP
PLAYBACK
YES
YES
RECORD TRACK'S PLAY SELECT KEY OFF
YES
HEAR INPUT?
The other selection you may make is RECORD ONLY. With this selected,
you will only hear the input signal whilst actually recording, regardless of
the status of the record track’s PLAY select key. I.e.:
RECORD
STOP
PLAYBACK
YES
NO
RECORD TRACK'S PLAY SELECT KEY ON OR OFF
NO
HEAR INPUT?
RECORD ONLY is useful when you only ever want to hear the input
signal during record and at no other time. The system will take care of
the switching automatically.
RECORD MODE
This is a duplicate of the same parameter on the main record page which
allows you to select how the recordings you are about to make are stored
in the project.
Summary of Contents for RE32
Page 10: ...Page ix ...