manualshive.com logo in svg

Akai RE32, Operator'S Manual

The Akai RE32 Operator's Manual is a comprehensive guide that ensures seamless user experience with this exceptional product. Offering step-by-step instructions, troubleshooting tips, and advanced features, this manual is available for free download at manualshive.com, providing users with easy access to unlock the full potential of their Akai RE32.

Share
Download
background image

126

Version 1.00

DISK MANAGEMENT

NOTES ABOUT BACKUP/RESTORE

When backing up data to disk, there are a few things you should be aware of.

•

When ALL PROJECTS, ALL LIBRARIES, and ALL PROJS & LIBS  are selected as the BACKUP
TYPE, if any projects and/or libraries use audio from other disks, this audio will also be backed
up. However, when you come to restore this data, the material from the other disks will be
restored to the single ‘destination’ disk selected in the TO DISK field. For example:

SFX

MUSIC

DIALOGUE

ID#0

ID#1

ID#2

BACKUP

Tape Drive

SFX, MUSIC and DIALOGUE

ID#0

ID#1

ID#2

RESTORE

Tape Drive

In the above example, SFX, music and dialogue from disk IDs 0, 1 and 2 are backed up to tape
but these will be restored to the disk selected (in this example, Disk ID#0)

In other words, you should ensure that the destination disk for the restore is large enough to
accommodate all the material (the RE32 will inform you if it isn’t).

•

If the data you are trying to backup to tape is larger than that which the tape can hold (or if there
is already quite a bit of data on the tape), the backup will be done across two or more tapes.
The RE32 will prompt you if this is the case and will tell you to insert another tape. If the tape is
unformatted and unsuitable for use, you will be prompted to format the tape whereupon the
backup will continue.

Of course, there is nothing wrong with this practice but it may get awkward trying to keep track
of your backups and so, in view of this, to avoid this situation, you might prefer to use new,
freshly formatted tapes when attempting a backup.

Summary of Contents for RE32

































































































































































































Reviews:

No comments

Related manuals for RE32

GE NetworX NX-6V2 Installation Instructions Manual preview
NetworX NX-6V2
Brand: GE Pages: 8
Waters 2690 Quick Start Manual preview
2690
Brand: Waters Pages: 55
Paradox IP150 Programming Manual preview
IP150
Brand: Paradox Pages: 2
Datavideo RMC-230 Instruction Manual preview
RMC-230
Brand: Datavideo Pages: 17
Datamax I-Class Installation And Operating Instructions Manual preview
I-Class
Brand: Datamax Pages: 22
Uclear Motion Series User Manual preview
Motion Series
Brand: Uclear Pages: 40
Radware Alteon Installation And Maintenance Manual preview
Alteon
Brand: Radware Pages: 98
RabbitCore RCM2200 Getting Started Manual preview
RCM2200
Brand: RabbitCore Pages: 34
Rane ZR1 Datasheet preview
ZR1
Brand: Rane Pages: 2
Vanderbilt SPCN310 Installation Instruction preview
SPCN310
Brand: Vanderbilt Pages: 2
Vag GA Industries 930-DT Installation, Operation And Maintenance Manual preview
GA Industries 930-DT
Brand: Vag Pages: 4
Magicfx FX-COMM4NDER MFX3203 User And Installation Manual preview
FX-COMM4NDER MFX3203
Brand: Magicfx Pages: 16
Climatisation RC4 Operating Manual preview
RC4
Brand: Climatisation Pages: 52
TECOM Challenger v8 Quick Reference User Manual preview
Challenger v8
Brand: TECOM Pages: 8
Aurora AU-A1ZBSCD Manual preview
AU-A1ZBSCD
Brand: Aurora Pages: 2
Inkel IRG-8116 Operation Manual preview
IRG-8116
Brand: Inkel Pages: 12
Bailey Infi 90 IMSPM01 Instruction preview
Infi 90 IMSPM01
Brand: Bailey Pages: 52
Anthem MDX Crestron Manual preview
MDX Crestron
Brand: Anthem Pages: 8

Brands by name

Popular brands

Load more brands