manualshive.com logo in svg

Akai RE32, Operator'S Manual, Page: 139 / 192

Share
Download
Akai RE32 Operator'S Manual Download Page 139

Version 1.00

129

DISK MANAGEMENT

ARCHIVING DATA TO DAT

Selecting AUDIO DAT in the BACKUP page takes you to this page:

Here you may backup the contents of your disk to a normal DAT machine via the digital audio I/O.

The parameters in the ARCHIVE page are:

DISK

This selects which disk you will archive.

ARCHIVE TYPE

Here you may select the type of item you wish to archive. The options
are:

SINGLE FILE

This allows you to select a single file for
archiving. When SINGLE FILE is selected,
FILE TYPE and FILE NAME fields appear
below the ARCHIVE TYPE field where you
may select the type and the file for archiving.

The SINGLE FILE option is very convenient
for archiving single projects to DAT.

ALL PROJECTS

This will archive all projects and any audio

associated with them.

ALL LIBRARIES

This will archive all libraries and any audio

associated with them.

ALL FILES

This will archive all projects and libraries and
any audio associated with them. It will not
archive any unreferenced audio.

ALL LIBRARIES

This will archive all libraries and any audio

associated with them.

DUPLICATE DISK

This makes a complete copy of everything on
the disk to the DAT.

NOTE: When ALL PROJECTS, ALL LIBRARIES, ALL FILES and DUPLICATE DISK are
selected, the FILE TYPE and FILE NAME fields are not shown.

Summary of Contents for RE32

































































































































































































Reviews:

No comments