Departement of international trade:
40
You can change the parameter
selected in the submenu
and
using the buttons
o exit the sub menu and from the menu
to
the search mode press a button
* MENU OPTIONS
1. Tones Settings RT (Border 2, Border 3, Border 4, Freq. RT);
2. Tones Settings ST (Frequency LT, Freq. 2, Freq. 3, Freq. 4, Freq. 5);
3. Other Settings (Duration ST, Economy Mode, GS Filter, Rate
MM,EMI Filter MM);
4. GS filtering settings (Filter GS, GS zone)
5. Deep settings (Filter T, Filter H)
To configure the parameters that work separately for each of the 4 search
programs, you need to enable the Additional menu from a specific custom
program.
For example, if you decide to set the length of the ST for pro-
gram №2, you need to first enable program №2, then enter the Addition-
al menu for settings.
* TONE SETTINGS
In this menu you can adjust the audio VDI boundaries for the RT tones
to suit your particular needs. By narrowing or expanding the bound-
aries of tones, you can achieve the fact that the groups of goals that are
characteristic of the region of your searches will differ in sound. Also in
this submenu, you can enable an additional tone in voicing iron targets.
(
Add. Fe tone
) Two tones in the ferrous sector help to more clearly dis-
tinguish the difference in the sound of large and small iron, and it is also
better to distinguish the presence of a “ferrous component” in high-tone
signals for large and flat iron.
Additional Tone Fe is turned on for all types of sound indication at the
same time.
