Departement of international trade:
37
identification SFT algorithm of the device is turned off, which serves to
improve the identification of deep targets. The device operates in real
time, almost completely simulating the operation of analog devices. It
might appeal to those who like to output the signal from the target in
real time without delays or unnecessary processing. But it should be re-
membered that it often makes mistakes in identifying deep targets with
high mineralization of the soil. True, like analog devices, this mode is
capable of making mistakes in the “right direction”, by sounding a good
target with non-ferrous, which in “smarter” modes the device will con-
sider as iron, having all the signs of ferrous metal for the identification
algorithm. In places with high metal debris, this mode is perhaps less
“acute” emphasizes weak signals from targets lying close to large iron
debris than the MM mode. It may be easier to understand the picture
of what is under the sensor of your device. That is, it can be summarized
as follows: this mode, which imitates the operation of an analog device,
simultaneously has all the pros and cons of an analog device.
It should be remembered that when this mode is working, the hodograph
on the screen continues to be processed by the SFT algorithm. That is, it is
output after the sound, and may not match the tone. That is, a situation
may arise when a real- time sound will voice the target with a non-ferrous
signal, and the hodograph that has passed the mathematical processing will
show iron. And vice versa. Who of them to believe at a particular moment is
up to you to decide based on experience and intuition.
RT-М99 [Real time - Multi-frequency multi-tone].
It is similar in charac-
teristics to the RT-M mode. Distinguished by rich sound coloring of the
signal, and the presence of multi-tone scoring of the non-ferrous metal
sector in increments of 1 degree.
RT-ST [Real-Time - Short tone].
This is the preferred sound setting.
Sound indication of the object occurs in 2 stages. Real time sound ap-
pears first (RT) with a medium tone, and then, after the object is identi-
fied the RT threshold tone is replaced by the ST tone of an appropriate
frequency. The duration of the tone can be changed using the Duration
ST.
RTL-ST [Real time before the threshold - Short tone].
Along with RT-ST
this is the other main type of sound indication. Different from the
