Io IP Transport, Capture, Display v16.2r1 70 www.aja.com
Guidance for SMPTE ST 2110-23
For JSON Configuration
1. Go into Advanced Ip Config / Generate for JSON.
2. When doing this behavior is to now automatically set up for 2K/HD on SFP 1,
or 4K/UltraHD across both SFPS.
3. Set Tx Remote to the IP address to which you are sending.
4. On receiving device use this same IP address (i.e. Rx IP address should match
your Tx IP address).
5. Un-check follow input on the receiving Io IP.
6. Manually set the frame rate in the frame buffer within AJA Control Panel.
For SDPs
1. Change the 4K/UltraHD network settings in the JSON 4K setup from false to
true.
2. Un-check follow input.
3. Then just one SDP is entered in capture input 1 and sets automatically for all
four streams.
4. Manually change frame buffer on any format change.
