Io IP Transport, Capture, Display v16.2r1 54 www.aja.com
NOTE: When you change between operating modes, you may need to connect to
a different physical media network, or reconfigure that media network for
compatible operation.
Click
Install
to erase the current firmware and load the desired firmware. After
changing the firmware you will need to reset the Io IP.
Info Screen
The Info Screen shows the software files that have been installed on your
system. This information may be needed if you talk to an AJA Customer Service
representative to determine if files are missing or need updating.
Control Panel Operation with s2110 Firmware
Overview
Io IP's s2110 firmware supports the transport of uncompressed SDI video (up to
4Kp60) and embedded digital audio streams over a network. These audio and
video streams can be sent and received independently.
Requirements
• 10G network
• PTP network timing system
General Operation
When running s2110 firmware, a new Io IP must be configured before operation.
Once initially configured, that Io IP can be set to receive JSON or SDP information,
which completes that device's configuration for a specific workflow task (playing
back and/or capturing SDI video and audio over the network).
