Io IP Transport, Capture, Display v16.2r1 14 www.aja.com
When Io IP outputs video in SMPTE 2022-6 mode, it locks to this reference signal.
When connecting a reference video source, the locking signal should be the same
format as the Primary format selected in Io IP software. It is possible in some
circumstances to use an alternate format video signal if the basic frame rate is
compatible.
Io IP can also lock to an incoming SMPTE 2022-6 signal, or it can free run.
Balanced Analog Audio Input and Output
A 25-pin connector provides 8-channel balanced analog audio, 24-bit 48kHz
sample rate D/A and A/D, for use with an industry standard 8x XLR on DB-25
breakout cable (cable not included). The eight analog audio channels can be
configured four different ways:
• Ch 1-8 Output
• Ch 1-4 Input and Ch 5-8 Output (default setting)
• Ch 1-4 Output and Ch 5-8 Input
• Ch 1-8 Input
12V Power Connector
A standard 4-pin XLR type connector is provided for either battery or line source
power using the supplied AC power adapter.
Bottom Plate
Ventilation
Ventilation holes on the angled bottom plate provide cooling airflow even when
the unit is placed on a flat surface.
Rubber Feet
Rubber feet embedded in the bottom plate provide for non-sliding desktop
placement.
Threaded Mounting Holes
Two 6-32 threaded mounting holes that accept screws up to 0.4” deep are located
4.213” apart near the horizontal centerline of the bottom plate.
In This Manual
Chapter 1 - Introduces the product briefly, listing features and system
requirements.
Chapter 2 - Provides complete instructions for installing and configuring the
product.
Chapter 3 - Discusses operational aspects and how to work with 3rd-party
software.
Appendix A - Presents a list of technical specifications for the product.
Appendix B - Provides important Safety and Compliance information.
