Airwell Multi Split DUO 50 DCI, Service Manual

Page: 110 / 151

16-9
APPENDIX A
SM DLF 1-A.1 GB
OPERATION
OPERATION
SETTING THE TIMER
Press button TIMER to activate the timer
operation mode. Each time the TIMER button
is pressed, one of the three types of operation
modes will appear on the LCD display.
Timer setting will not change until new setting is
input.
A) HOW TO SET THE ON TIME
1. Press the TIMER button
to select the desired
timer.
2. Press the SET button till
the ON sign blinks.
3. Press the + or - (HOUR)
button until the desired
value is displayed.
4. Press the SET button to
activate the timer.
B) HOW TO SET THE OFF TIME
1. Press the TIMER button to select the desired
timer.
2. Press the SET button till the OFF sign blinks.
3. Press the + or - (HOUR) button until the
desired value is displayed.
4. Press the SET button to activate the timer.
C) HOW TO SET A PROGRAM FOR DAILY ON/
OFF OPERATION
1. Press the TIMER button to select the desired
timer.
2. Press the SET button till the ON sign blinks.
3. Press the + or - (HOUR) button until the
desired value is displayed.
4. Press the SET button again, the OFF sign
blinks.
5. Press the + or - (HOUR) button until the
desired value is displayed.
6. Press the SET button to activate the timer.
TIMER
IFEEL
SLEEP
SET
CLEAR
ROOM
MODE
HOUR
TEMP
LOCK FUNCTION
By pressing LOCK button, the remote control
will lock the last operation program. All the
function buttons will be inoperative, including
START/STOP button. By pressing LOCK button
again the remote control will be released from its
locked position. When lock mode is functioning,
the transmission sign
will be on.
NOTE
Room temperature range is between 6 and 36
in 1 increments. Display should show "HI" or
"LO" to represent temperature that is above
36 or below 6.
ROOM TEMP FUNCTION OPERATION
Press the ROOM button to show the actual room
temperature around the remote control unit.
The measured room temperature and the room
temperature sign
will be displayed.
To cancel the ROOM Temperature display press
on one of the following:
Press again on ROOM Temperature button.
Change of MODE button.
I FEEL TEMP FUNCTION OPERATION
Press button IFEEL to activate the IFEEL
function. Thermometer sign will appear on the
LCD operation display
. Select suitable
temperature setting. Make sure that the remote
control unit is aimed at the air conditioner, with
the IFEEL sensor in front. Prevent the IFEEL
sensor from being affected by heat sources such
as lamps, heaters, direct sun, etc. or from being
directly affected by the air conditioner air flow.
These may cause the sensor to transmit the
wrong temperature data, thereby disturbing the
performance of the IFEEL function.