IAS-2000 v2
User’s Manual
.
75
5.3.1.4 LDAP
Server
Choose
“LDAP”
in the
Authentication Method
field, the hyperlink beside the pull-down menu will become
“LDAP
Setting”
.
y
Server Name:
Set a name for the server using numbers (0 to 9), alphabets (a to z or A to Z), dash (-),
underline (_) and dot (.) with a maximum of 40 characters, all other letters are not allowed.
y
Sever Status:
The status shows that the server is enabled or disabled.
y
Postfix:
Set a postfix that is easy to distinguish (e.g. Local) for the server by using numbers (0 to 9), alphabets
(a to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
y
Blacklist:
There are five sets of the black lists. Select one of them or choose
“None”
. Please refer to
5.3.3
Black List Configuration
y
Authentication Method:
There are four authentication methods,
POP3
,
Radius
,
LDAP
and
NTDomain
to
configure from. Select the desired method and then click the link besides the pull-down menu for more
advanced configuration.
y
Policy Name:
There are ten policies to choose from to apply to this particular server.
Summary of Contents for IAS-2000 V2
