AirLive IAS-2000 V2 User Manual Download

Page: 95 / 163

IAS-2000 v2

User’s Manual

Rule Item:

This is the

rule selected.

Rule Name:

The rule name can be changed here.

Enable this Rule:

After checking this function, the rule will be enabled.

Action:

There are two options,

Block

and

Pass

Block

is to prevent packets from passing and

Pass

is to permit packets passing.

Protocol:

There are three protocols to select,

TCP

UDP

and

ICMP

, or choose

ALL

to use all three

protocols.

Source MAC Address:

The MAC address of the source IP address. This is for specific MAC

address filter.

Source/Destination Interface:

There are five interfaces to choose,

ALL

WAN1

WAN2

LAN1

and

LAN2

Source/Destination IP:

Enter the source and destination IP addresses.

Source/Destination Subnet Mask:

Enter the source and destination subnet masks.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands