AirLive IAS-2000 V2 User Manual Download

Page: 128 / 163

IAS-2000 v2

User’s Manual

121

5.4.3 Firmware Upgrade

The administrator can download the latest firmware from the website and upgrade the system here. Click

Browse

search for the firmware file and click

Apply

to go on with the firmware upgrade process. It might be a few minutes

before the upgrade process completes and the system needs to be restarted afterwards to make the new firmware

effective.

Warning: 1. Firmware upgrade may cause the loss of some of the data. Please refer to the release notes for the

limitation before upgrading the firmware.

2. Please restart the system after upgrading the firmware. Do not power on/off the system during the

upgrade or the restart process. It may damage the system and cause it to malfunction.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands