AirLive IAS-2000 V2 User Manual Download

Page: 150 / 163

IAS-2000 v2

User’s Manual

143

Appendix B.

Console Interface Configuration

Via this port to enter the console interface for the administrator to handle the problems and situations occurred

during operation.

1. To connect the console port of IAS-2000 v2, a console,

modem cable and a terminal simulation program, such

as the Hyper Terminal are required.

2. Please set the parameters as

9600,8,n,1

for Hyper

Terminal.

Caution: the main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the

keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.

3. Once the console port of IAS-2000 v2 is connected properly, the console main screen will appear automatically.

If the screen does not appear in the terminal simulation program automatically, please try to press the arrow

keys, so that the terminal simulation program will send some messages, and the welcome screen or the main

menu will appear. If the welcome screen or the main menu of the console still does not appear, please check the

connection of the cables and the settings of the terminal simulation program.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands