manualshive.com logo in svg

AirLive IAS-2000 V2, User Manual

Share
Download
AirLive IAS-2000 V2 User Manual Download Page 30

IAS-2000 v2 

User’s Manual 

.

 

23

 

y

 

Step 5: Set LAN1 DHCP Server 

If Enable DHCP Server option is selected, fields marked 

with red asterisk must be filled in. 

Start IP Address:

 The start IP address that will be 

assigned to the Public LAN clients.

 

End IP Address:

 The end IP address that will be 

assigned to the Public LAN clients.   

(Note: Be sure that IP addresses assigned from 

Start IP address to End IP address are NOT used in 

other settings by IAS-2000 v2.) 

Domain Name:

 Enter a domain name provided by the 

ISP (e.g. airlive.com). 

 

 

WINS Server:

 Enter the IP address of the WINS Server (Windows Internet Naming Service Server). This field 

is optional. 

Preferred DNS Server:

 The DNS Server settings are provided by the ISP. Only the Preferred DNS Server field 

is mandatory. Contact the ISP if the DNS Server settings are unknown. 

Alternate DNS Server:

 The DNS Server settings are provided by the ISP. This field is optional. 

Click 

Next

 to continue. 

 

y

 

Step 6: Select Default Authentication Server 

Set the user’s information in advance. Enter an easy 

identified name as the postfix name in the 

Postfix 

Name

 field (e.g. airlive) and choose an authentication 

method. 

Click 

Next

 to continue.

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for IAS-2000 V2




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands