AirLive IAS-2000 V2 User Manual Download

Page: 67 / 163

IAS-2000 v2

User’s Manual

5.2.6 Dynamic DNS

IAS-2000 v2 provides a convenient DNS function to translate the IP address of WAN port to a domain name that

helps the administrator memorize and connect to WAN port. If the DHCP is activated at WAN port, this function will

also update the newest IP address regularly to the DNS server. These settings will become effective immediately

after clicking

Apply

DDNS:

Enabling or disabling of this function.

Provider:

Select the DNS provider.

Host name:

The IP address/domain name of the WAN port.

Username/E-mail:

The register ID (username or e-mail) for the DNS provider.

Password/Key:

The register password for the DNS provider.

Please click

Apply

and these settings will become effective immediately.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands