AirLive IAS-2000 V2 User Manual Download

Page: 66 / 163

IAS-2000 v2

User’s Manual

5.2.5 Proxy Server Properties

IAS-2000 v2 supports Internal Proxy Server and External Proxy Server functions. Please perform the necessary

configurations.

Internal Proxy Server:

IAS-2000 v2 has a built-in proxy server. If this function is enabled, the end users will be

forced to treat IAS-2000 v2 as the proxy server regardless of the end-users’ original proxy settings.

External Proxy Server:

Under the IAS-2000 v2 security management, the system will match the External Proxy

Server list to the end-users’ proxy setting. If there isn’t a matching, then the end-users will no be able to reach

the login page and thus unable to access the network. If there is a matching, then the end-users will be directed

to the system first for authentication. After a successful authentication, the end-users will be redirected back to

the desired proxy servers depending on various situations.

Please click

Apply

and these settings will become effective immediately.

For more details about how to set proxy servers, please see Appendix D and E.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands