AirLive IAS-2000 V2 User Manual Download

Page: 132 / 163

IAS-2000 v2

User’s Manual

125

The description of the table is as follows:

Item

Description

Current Firmware Version

The present firmware version of IAS-2000 v2

System Name

The system name. The default is Internet Access Gateway

Home Page

The page the users are directed to after initial login is

successful.

Syslog server- Traffic History

The IP address and port number of the external Syslog

Server.

N/A

means that it is not configured.

Proxy Server

Enabled / Disabled stands for the system is currently using

the proxy server or not.

Friendly Logout

Enabled / Disabled stands for the setting of hiding or

displaying an extra confirmation window when users click

the logout button.

Internet Connection Detection

Show a warning message when Internet connection is

down.

WAN Failover

Show WAN1 and WAN2 status when WAN Failover is

enabled.

Remote Management IP

The IP or IP range that is allowed for accessing the

management interface.

Manage

SNMP

Enabled / Disabled stands for the current status of the

SNMP management function.

Retainable Days

The maximum number of days for the system to retain the

users’ information.

History

Traffic log Email To

The email address that the traffic history information will be

sent to.

NTP Server

The network time server that the system is set to align.

Time

Date Time

The system time is shown as the local time.

Idle Timer

The number of minutes allowed for the users to be inactive.

Multiple Login

Enabled / Disabled stands for the current setting to allow or

disallow multiple logins form the same account.

User

Guest Account

Enabled / Disabled stands for the current status of allowing

Guest Accounts to log in.

Preferred DNS Server

IP address of the preferred DNS Server.

DNS

Alternate DNS Server

IP address of the alternate DNS Server.

Server Status

The current status of the PMS server.

PMS

IP:Port

The IP and Port information of the PMS server.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands