AirLive IAS-2000 V2 User Manual Download

Page: 127 / 163

IAS-2000 v2

User’s Manual

120

5.4.2 Backup/Restore Setting

This function is used to backup/restore the IAS-2000 v2 settings. Also, IAS-2000 v2 can be restored to the factory

default settings here.

Backup Current Setting:

Click

Backup Settings

to create a .db database backup file and save it on disk.

Restore system settings:

Click

Browse

to search for a .db database backup file created by IAS-2000 v2 and

click

Restore system settings

to restore to the backup settings saved previously.

Reset to the factory-default settings:

Click

Reset

to load the factory default settings of IAS-2000 v2.

Caution: Resetting to factory default settings will clear/restore all settings such as policies, billing plans, all user

databases, and any configuration to the initial states.

Summary of Contents for IAS-2000 V2




































































































































































Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands

AirLive IAS-2000 V2, User Manual

Search results

Summary of Contents for IAS-2000 V2

Reviews:

Related manuals for IAS-2000 V2

Brands by name

Popular brands