Introduction
18
Chillers
DeltaChill
TM
DeltaChill Technical Manual 9758541 V1.1_06_2020
Anti Vibration Mounts - Spring Type
Specially selected spring vibration isolators shall be supplied loose for on-site fitting to the base frame of each unit. The
isolators shall be suitable for fitting to structural steelwork providing the surface is level and of sufficient strength where a
high level of vibration elimination is required.
Mechanical
Construction
The base is fabricated from galvanised steel to ensure a rigid, durable weatherproof construction. The superstructure is
manufactured from galvanised sheet steel coated with epoxy baked powder paint to provide a durable and weatherproof
finish. The standard unit colour is Light Grey (RAL 7035). Compressors and evaporators are mounted on a rigid
galvanised heavy-duty sub frame and the fully weatherproof electrical panels are situated at one end of the unit.
Extended Discharge Air Plenum - Condenser Fan
Constructed from galvanised sheet steel coated with epoxy baked powder paint, this plenum directs discharge air
vertically, thus limiting air re-circulation and provides a degree of acoustic reduction in the horizontal plane. For details
please contact Airedale. Standard unit colour is Light Grey (RAL 7035). For further details refer to Dimensional Data.
Compressor Enclosure
Optional compressor enclosure offers improved resistance to dust over the standard compressor’s IP54 housing. The
weatherproof compressor enclosure is recommended for installations with particularly adverse dusty environments.
Compressor enclosures are fitted with forced ventilation as standard, which activates if a leak of refrigerant is detected.
Lifting Eye Bolts/Lifting Lugs
Lifting eye bolts/lifting lugs shall be fitted for use with either slings or shackles.
Anti Vibration Mounts - Pad Type
Pad vibration isolators can be supplied loose for on-site fitting to the base frame of each unit. The isolators are suitable
for fitting to structural steelwork providing the surface is level and of sufficient strength where a moderate degree of
vibration elimination is required.
Features
DCCxxxDR
DCCxxxDX
DCFxxxDR
DCFxxxDX
DCCxxxTR
DCCxxxTX
DCFxxxTR
DCFxxxTX
General
No Plenum
● ● ● ● ● ● ● ●
300mm Fan Discharge Plenum
○ ○ ○ ○ ○ ○ ○ ○
800mm Extended Height Fan Discharge Plenum
○ ○ ○ ○ ○ ○ ○ ○
Lifting Lugs/Eye Bolts
● ● ● ● ● ● ● ●
Compressor Enclosure - Standard Insulation
○
●
○
●
○
●
○
●
Compressor Enclosure - Profiled Insulation
○ ○ ○ ○ ○ ○ ○ ○
Compressor Acoustic Jackets*
○ ○ ○ ○
– – – –
Anti-vibration Pad Mounts
○ ○ ○ ○ ○ ○ ○ ○
Anti-vibration Spring Mounts
○ ○ ○ ○ ○ ○ ○ ○
Rain hood*
○ ○ ○ ○ ○ ○ ○ ○
●
Standard Features
○
Optional Features
–
Features Not Available
* Model dependant, please contact Airedale.
