Agilent Technologies N4413A, User Manual

Page: 63 / 234

Using the Multiport Test System
How to Use Markers
Chapter 3 53
Setting Up Delta Displays
Right-click any marker to make it the reference marker and to set up delta displays. Other
defined markers turn gray and show the values relative to the reference marker.
You can also right-drag on the display to show the value under the pointer as a delta value
from the reference (active) marker.
Setting Marker Properties
Right click the right edge of the Markers window to open the markers properties box on Polar
or Smith Charts.
SELECT: TO:
Display All Markers Show all set markers on display.
Display Active Marker Restrict marker display to the active marker.
Mag + Angle Show the magnitude and angle of the reflection coefficient.
dB + Angle Show the log magnitude and angle of the reflection coefficient.
Real + Imag Show the real and imaginary parts of the reflection coefficient.
Impedance Show the real and imaginary parts of the impedance.
Admittance Show the real and imaginary parts of the admittance.