Agilent Technologies N4413A, User Manual

Page: 33 / 234

Using the Multiport Test System
How to Set Up the Multiport Test System Hardware
Chapter 3 23
To Connect the RF Cables between the Multiport Test Set and the
Network Analyzer
An illustration showing each multiport test system and its interconnections is provided in this
section. Each illustration has a corresponding table that lists the sequence of each
interconnection, the interconnect cable part number, and the connector label for the network
analyzer and the S-parameter test set.
Connect the RF cables between the front panel of the test set and the front panel of the
network analyzer using the interconnect information provided in this section.
Refer to the specific interconnect information for your test set model number.
• For the N4413A, refer to “Interconnections for the N4413A/N4414A Test Set” on page 25 .
• For the N4414A, refer to “Interconnections for the N4413A/N4414A Test Set” on page 25 .
• For the N4415A, refer to “Interconnections for the N4415A Test Set” on page 26 .
• For the N4416A, refer to “Interconnections for the N4416A Test Set” on page 28 .
• For the N4417A, refer to “Interconnections for the N4417A Test Set” on page 30 .
• For the N4418A, refer to “Interconnections for the N4418A Test Set” on page 32 .
• For the N4419A, refer to “Interconnections for the N4419A Test Set” on page 34 .
• For the N4421A, refer to “Interconnections for the N4421A Test Set” on page 36 .
Refer to "Multiport Test System Configurations,” on page 3 and "Agilent Network Analyzer
Option Reference Table,” on page 4 for additional information about test set and network
analyzer model and option requirements.