Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 24 / 634

24 Agilent 6000 Series Oscilloscopes Programmer's Reference
1
What's New
What's New in Version 3.00
New features in version 3.00 of the 6000 Series oscilloscope software are:
• The :SBUS command subsystem for controlling serial decode bus
display, mode, and other options.
• The EBURst trigger mode and supporting :TRIGger:EBURst commands.
• The :ACQuire:AALias and :ACQuire:DAALias commands.
• The :WAVeform:POINts:MODE command.
• The :MEASure:SDEViation command.
• The :TIMebase:REFClock command.
• Changes to the :TRIGger:IIC commands.
• Changes to the :TRIGger:SEQuence:TRIGger command.
• Changes to the :ACQuire:TYPE and :WAVeform:TYPE commands to add
HRESolution type.
• Changes to the :BLANk, :DIGitize, :STATus, :VIEW, and
:WAVeform:SOURce commands to include the serial decode bus.
• Changes to the :HARDcopy:FORMat command to support the PNG,
ASCiixy, and BINary format types.
• Changes to the :DISPlay:DATA? query and the :PRINt command to
support the PNG format.
• Changes to the :WAVeform:POINts command to set from 2000 to
8,000,000 points (in 1- 2- 5 sequence) when the waveform points mode is
MAXimum or RAW.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Command Description
:ACQuire:AALias? (see page 140 ) Returns the current state of the oscilloscope's
anti-alias control.
:ACQuire:DAALias (see page 143 ) Sets the oscilloscope's disable anti-alias mode.
:MEASure:SDEViation (see page 268 ) Measures the std deviation of a waveform.
:SBUS:DISPlay (see page 303 ) Controls the decoded serial bus display.
:SBUS:MODE (see page 310 ) Determines the decode mode for the serial bus.
:SBUS:SPI:WIDTh (see page 311 ) Determines the number of bits in a word of
decoded data for SPI.
:TIMebase:REFClock (see page 325 ) Enables or disables the 10 MHz REF BNC
input/output.