Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 237 / 634

Commands by Subsystem
3
Agilent 6000 Series Oscilloscopes Programmer's Reference 237
:MARKer:X2Position
(see page 564 )
Command Syntax
:MARKer:X2Position <position> [suffix]
<position> ::= X2 cursor position in NR3 format
<suffix> ::= {s | ms | us | ns | ps | Hz | kHz | MHz}
The :MARKer:X2Position command sets :MARKer:MODE to MANual, sets
the X2 cursor position and moves the X2 cursor to the specified value.
Query Syntax
:MARKer:X2Position?
The :MARKer:X2Position? query returns current X2 cursor position. If the
front- panel cursors are off an error is returned. This is functionally
equivalent to the obsolete :MEASure:TSTOp command/query.
Return Format
<position><NL>
<position> ::= X2 cursor position in NR3 format
See Also
• "Introduction to :MARKer Commands" on page 233
• ":MARKer:MODE" on page 234
• ":MARKer:X1Position" on page 235
• ":MARKer:X2Y2source" on page 238
• ":MEASure:TSTOp" on page 518