Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 186 / 634

186 Agilent 6000 Series Oscilloscopes Programmer's Reference
3
Commands by Subsystem
:DIGital<n> Commands
Control all oscilloscope functions associated with individual digital
channels. See
"Introduction to :DIGital<n> Commands" on page 186.
Introduction to
:DIGital<n>
Commands
<n> ::= {0,..,15}
The DIGital subsystem commands control the viewing, labeling, and
positioning of digital channels. They also control threshold settings for
groups of digital channels (D0- D7, D8- D15).
Reporting the Setup
Use :DIGital<n>? to query setup information for the DIGital subsystem.
Table 51 :DIGital<n> Commands Summary
Command Query Options and Query Returns
:DIGital<n>:DISPlay {{0
| OFF} | {1 | ON}} (see
page 188 )
:DIGital<n>:DISPlay?
(see page 188 )
{0 | 1}
<n> ::= 0-15; an integer in NR1
format
:DIGital<n>:LABel
<string> (see page 189 )
:DIGital<n>:LABel? (see
page 189 )
<string> ::= any series of 6 or less
ASCII characters enclosed in
quotation marks
<n> ::= 0-15; an integer in NR1
format
:DIGital<n>:POSition
<position> (see
page 190 )
:DIGital<n>:POSition?
(see page 190 )
<n> ::= 0-15; an integer in NR1
format
<position> ::= 0-7 if display size =
large, 0-15 if size = medium, 0-31
if size = small
:DIGital<n>:SIZE
<value> (see page 191 )
:DIGital<n>:SIZE? (see
page 191 )
<value> ::= {SMALl | MEDium | LARGe}
:DIGital<n>:THReshold
<value>[suffix] (see
page 192 )
:DIGital<n>:THReshold?
(see page 192 )
<n> ::= 0-15; an integer in NR1
format
<value> ::= {CMOS | ECL | TTL | <user
defined value>}
<user defined value> ::= value in
NR3 format from -8.00 to +8.00
[suffix] ::= {V | mV | uV}
N O T E
These commands are only valid for the MSO models.