manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 85

Issue 2 - 07/00

       3-39

First Steps in Testing - Section 1

-1-

From the 

Set Defaults

 menu, select 

Factory

Defaults

. aurora

Sonata

 prompts you to confirm

that you wish to select the factory defaults.

Note

This cancels any custom defaults you have set up—see 

Saving

the current settings as custom defaults

 later in this section for

details on this feature.

-2-

To confirm, press the 

OK 

function key. To close

the confirmation window without changing
any settings, press 

ESC

.

List of factory defaults

The following tables list aurora

Sonata

’s factory default settings.

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands