manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 165

Issue 2 - 07/00

       4-55

Testing in Simulation Mode - Section 5

CorNet-T

•

Advice of Charge (AOC)

 •

ISDN Sub-addressing

 

•

Closed User Groups (CUG)

Call Forwarding 

 

 

Call Forwarding allows the subscriber to send incoming calls
to a different number. Various types of Call Forwarding are
available, depending on the protocol being used.

Note

Call Forwarding is set up in advance for future incoming calls.
It is not the same as Call Deflection, which deflects a single
call when it is presented. For details on Call Deflection, see

Testing services for incoming calls

 later in this section.

Setting up Call Forwarding

-1-

Display the main 

Simulate 

menu.

-2-

Select 

Supp Services

. aurora

Sonata

 displays a list

of the services available before call setup for
the selected protocol. For example:

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands