Agilent Technologies auroraSonata User Manual Download Page 36

Page: 36 / 336

aurora

Sonata

Hand Held ISDN Tester—User Guide

2-10

427869

Removing & replacing the belt hook

aurora

Sonata

has a removable belt hook, attached to the battery

pack cover at the back of the unit. You can use the hook to
carry the unit or to hang it up for hands-free operation.

Removing the belt hook

-1-

Remove the battery pack cover. To do this:

•

Loosen the screw by turning it

anticlockwise using a coin or screwdriver.

•

When the screw is released, it pops up.

Slide the cover upwards to remove.

-2-

Turn the cover over to show the belt hook

release mechanism. The hook is held in place
by a small bolt.

-3-

Remove the bolt from its holder. To do this:

•

Release the bolt by pushing it upwards.

•

Slide the bolt out of its holder.

Summary of Contents for auroraSonata

















































































































































































































































































































































Search results

Summary of Contents for auroraSonata

Reviews:

Brands by name

Popular brands

Agilent Technologies auroraSonata, User Manual

Search results

Summary of Contents for auroraSonata

Reviews:

Brands by name

Popular brands