manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 16

aurora

Sonata

Hand Held ISDN Tester—User Guide

1-8

  427869

Supplied with aurora

Sonata

aurora

Sonata

 is supplied in a carrying case along with:

•

a mains adaptor/battery charger

•

cables for the fitted interfaces

•

any optional cables or accessories your

organisation has purchased

•

this User Guide

The packing list supplied with aurora

Sonata

 gives details of

exactly what you should have received.

Tip

Keep your User Guide in the carrying case with aurora

Sonata

, so

that you can consult it whenever you need to.

How aurora

Sonata

 fits together

The tester consists of a main unit, onto which are fitted one or
more optional interface modules. Each module is used to test a
particular telecommunications interface. For details, see 

About

the optional interfaces

 later in this chapter.

Your aurora

Sonata

 is fitted with the combination of interface

modules that you or your organisation have chosen. If you
need details about other interfaces, see Chapter 9 section 2.

 Warning: Interface modules

Do not attempt to remove an interface module from the tester
unless you have been specifically authorised to do so by
Agilent Technologies or your local representative.

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands