manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 274

aurora

Sonata

Hand Held ISDN Tester—User Guide

9-6

  427869

BRI U interface (4B3T)

Physical

Designed to conform to ETR080 and FTZ 1TR220.

Connectors

4 pin FCC 64 4-4. Pinout: pin 1 data input, pin 2 no
connection, pin 3 no connection, pin 4 data input.

Maximum line voltage

120V DC.

PRI interface (E1)

Physical

ETSI conforms to CTR4.

Connectors

Primary Rate ISDN 8 pin RJ45. Pinout: pin 1 Rx (TE mode),
pin 2 Rx (TE mode), pin 3 no connection, pin 4 Tx (TE
mode), pin 5 Tx (TE mode), pin 6 no connection, pin 7 no
connection, pin 8 no connection.

The BRI S interface lead may be used for PRI.

Clock input 4 pin FCC 68 4-4. Pinout: pin 1 data input, pin 2
no connection, pin 3 no connection, pin 4 data input.

This enables the U interface lead to be used for clock input.

Serial port

Bi-directional, high speed RS232 port providing baud rates of
2.4, 9.6, 19.2, 38.4, 57.6 and 115.2 KBD.

8 pin mini DIN socket:

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands