manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 171

Issue 2 - 07/00

       4-61

Testing in Simulation Mode - Section 5

•

Highlight 

Yes 

or 

No 

as required, and press

ENTER

. If you choose 

Yes

, aurora

Sonata

sends the CLI information element to the
remote unit with all outgoing calls.

-3-

Enter the number to be sent.

•

Choose 

CLI

 to display an entry window:

•

Type the number (up to 20 characters) and

press 

ENTER

 to save it. The entry

window closes. To use a sub-address
(CorNet-N, CorNet-T and ETSI only),
select 

SUB 

and repeat the process.

-4-

Define whether, when the remote unit

receives the number, it presents it to the user.

•

Choose 

Present’

 to display the options:

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands