Agilent Technologies auroraSonata, User Manual

Page: 189 / 336

Issue 2 - 07/00 4-79
Testing in Simulation Mode - Section 5
-2-
When aurora
Sonata
receives the incoming call,
either:
• check the
SUB
display in the
Incoming
Call
screen
• press + 6 to display the
ISDN call
information
screen, and check the
CLI
SUB
details. See Getting information
about the current or last call in Chapter 3
section 2.
Testing services from the ISDN Test Suite
Tip
For an introduction to the ISDN Test Suite and its
applications, see
Introducing the ISDN Test Suite in section 1.
You can use aurora
Sonata
’s ISDN Test Suite to check:
• Calling Line ID Presentation/Restriction
• Connected Line ID Presentation/Restriction
• ISDN Sub-addressing
• Advice of Charge (AOC)
To check one of these services, you include it as a component
of the
Available services
one-button test.
Note
For AOC, this method does not show how many charging
units have been sent for the call. To see this information you
need to check the
ISDN call information screen
. See Advice
of Charge earlier in this section.
If CorNet-T is selected you cannot use the Test Suite.