manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 233

Issue 2 - 07/00

      7-3

Capturing & Analysing Protocol Information - Section 1

Decoding in Real
Time

There are two ways to display a decode of protocol events in
real time (i.e. as they occur):

•

by viewing the simple decode which aurora

Sonata

displays during test calls and line monitoring sessions.

•

by sending the protocol information via the serial
port to a PC or printer, where aurora

Sonata

 can

produce a more detailed decode.

Viewing the simple real-time decode

During calls in Simulation mode, aurora

Sonata

 displays a simple

protocol decode in a background window.

To display all of the 

Decode

 window for the call:

-1-

Press the 

 key.

During a line monitoring session, aurora

Sonata

 displays the

simple, real-time decode in the foreground.

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands