manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 223

Issue 2 - 07/00

      6-15

Advanced Features & System Maintenance - Section 2

Beginning unattended operation

-1-

From the main 

Simulate

 menu, select

Unattended unit

.

aurora

Sonata

 is now ready to receive and connect incoming calls.

The screen shows a series of boxes representing B channels.

Note

You cannot select a channel while the unit is unattended.

Enabling/disabling automatic call back

You can set up an unattended aurora

Sonata

 so that, when it

receives an incoming call which is then disconnected, it calls
back the number from which the call was made.

Note

aurora

Sonata

 uses the CLI sent by the calling unit as the callback

number.

To enable or disable this feature:

-1-

Press 

 to switch to the 

Call back

 option

window.

-2-

Highlight 

Enable 

or 

Disable 

and press 

ENTER

to tick the check box.

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands