manualshive.com logo in svg

Agilent Technologies auroraSonata, User Manual

Share
Download
Agilent Technologies auroraSonata User Manual Download Page 39

Issue 2 - 07/00

       2-13

Getting Started - Section 2

How to display the top level menu

When you switch on aurora

Sonata

, the top level menu for

Simulation mode is the first screen displayed after the
Welcome screen.

At any other time, you can return to the top level menu for
the operating mode (Simulation or Monitor) in which you are
currently using aurora

Sonata

. To do this press 

ESC, 

to exit from

each option list and sub-menu in turn. See 

Exiting from a

menu or option window

 later in this section.

Moving through the items in a menu

Use the arrow keys to move the cursor up and down through
the menu items, one at a time.

A scroll bar (  and  ) displayed to the left of a menu means
that there are more options than can fit on a single screen.
When a scroll bar is displayed, you can use the following keys
to move through the items more quickly:

•

To highlight the first item in the menu, press

 + 

.

•

To highlight the last item, press 

 + 

.

•

To move up one page, press 

 + 

.

•

To move down one page, press 

 + 

.

Summary of Contents for auroraSonata

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands