Agilent Technologies auroraSonata User Manual Download Page 28

Page: 28 / 336

aurora

Sonata

Hand Held ISDN Tester—User Guide

2-2

427869

Getting Started

This chapter gets you started by describing the basic tasks you
will need to perform frequently as you use your aurora

Sonata

Warning: Safety advice

Before you start: remember the safety and care advice set out
in Chapter 1.

Chapter summary

To allow you to find information more easily, the chapter is
divided into the following sections:

Section 1

Preparing to Use aurora

Sonata

Section 2

Using the Menus and Windows

Section 3

Basic Operations

The information is mainly intended for beginners, although it
covers operations that you will perform frequently whatever
your level of experience.

Tip

If you are a new user, read through the chapter carefully and
practise the different tasks it describes.

Summary of Contents for auroraSonata

















































































































































































































































































































































Search results

Summary of Contents for auroraSonata

Reviews:

Brands by name

Popular brands

Agilent Technologies auroraSonata, User Manual

Search results

Summary of Contents for auroraSonata

Reviews:

Brands by name

Popular brands