Agilent Technologies auroraSonata, User Manual

Page: 188 / 336

aurora Sonata Hand Held ISDN Tester—User Guide
4-78 427869
When the charge information is displayed in terms of currency
rather than units, aurora
Sonata
displays
CU
after the value.
Sending charging information manually
When the charging
Mode
(see Chapter 3 section 1) is set to
Manual
, you can use an aurora Sonata emulating an NT to send
charging information to a calling unit for an incoming test call.
To do this, in the
Connected
window for the call:
-1-
Press the
AOC
function key. aurora
Sonata
sends a
single charge unit to the caller.
ISDN sub-addressing
This service allows the subscriber to connect to terminals on a
PMP link which have the same CPN but different sub-
addresses.
Testing sub-addressing
Tip
The instructions below explain a detailed way to check the
operation of sub-addressing. For a quicker method, see
Testing
services from the ISDN Test Suite later in this section.
-1-
Make a self call to another B channel of your
aurora
Sonata
, using a sub-address. aurora
Sonata
sends
an outgoing Setup message to the network,
which includes a Called Party Sub-Address ID
information element.