Agilent Technologies AGC-100, Manual

Page: 78 / 96

Vacuum Gauge Controller AGC-100
78
Transmit:
ETH
[,a,bbb.bbb.bbb.bbb,ccc.ccc.ccc.ccc,ddd.ddd.ddd.ddd]
<CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a,bbb.bbb.bbb.bbb,ccc.ccc.ccc.ccc,ddd.ddd.ddd.ddd <CR><LF>
Description
a DHCP (dynamic host configuration protocol),
a =
0 –> Statically
1 –> Dynamically
bbb.bbb.bbb.bbb IP address
ccc.ccc.ccc.ccc Subnet address
ddd.ddd.ddd.ddd Gateway address
"Transmit (T)" and "Receive (R)" are related to host.
T:
TID
<CR> [<LF>]
R: <ACK> <CR> <LF>
T: <ENQ>
R: PVG <CR> <LF>
Request for gauge identification
Positive acknowledgement
Request for data transmission
Gauge identification
T:
SP1
<CR> [<LF>]
R: <ACK> <CR> <LF>
T: <ENQ>
R: 1,1.0000E-09,9.0000E-07 <CR> <LF>
Request for parameters of switching function 1
(setpoint 1)
Positive acknowledgement
Request for data transmission
Thresholds
T:
SP1
,1,6.80E-3,9.80E-3 <CR> [<LF>]
R: <ACK> <CR> <LF>
Modification of parameters of switching
function 1 (setpoint 1)
Positive acknowledgement
T:
FOL
,2 <CR> [<LF>]
R: <NAK> <CR> <LF>
T: <ENQ>
R: 0001 <CR> <LF>
T:
FIL
,2 <CR> [<LF>]
R: <ACK> <CR> <LF>
T: <ENQ>
R: 2 <CR> <LF>
Modification of filter time constant (syntax error)
Negative acknowledgement
Request for data transmission
ERROR word
Modification of filter time constant
Positive acknowledgement
Request for data transmission
Filter time constants
T:
PR1
<CR> [<LF>]
R: <ACK> <CR> <LF>
T: <ENQ>
R: 0,8.3400E-03 <CR> <LF>
T: <ENQ>
R: 1,8.0000E-04 <CR> <LF>
Request for measurement data
Positive acknowledgement
Request for data transmission
Status and pressure
Request for data transmission
Status and pressure
ETH - Ethernet configuration
5.13 Example