Agilent Technologies 969-8888, Instruction Manual

Page: 101 / 116

TECHNICAL INFORMATION
95/107 87-901-011-01
Installing the File Download Software
The MoniTorr connectivity kit comes with the soft-
ware needed to transfer via RS-485 all the data
stored. To install the software simply insert the CD
into the personal computer drive and run the Setup
program.
If the personal computer uses Windows 2000 Pro-
fessional Operating System, run the W2000.bat
file.
In the two cases the following screen will be dis-
played on the personal computer:
Close all the applications and then select OK. The
following screen will now be displayed on the per-
sonal computer monitor:
NOTE
It is suggested that you maintain the proposed di-
rectory and path so as to facilitate the identification
of the files generated by the system.
Click on the figure to continue with the installation.
At this point the following screen is displayed on
the personal computer monitor.
NOTE
It is suggested that you maintain the proposed
program group so as to facilitate the identification
of the program.
Select continue to go on with the installation. The
following screen is displayed on the personal com-
puter monitor.
Select OK to conclude the installation.
NOTE
If during installation the program finds some sys-
tem files that are out of date, you will be prompted
to restart the computer. In this case proceed to re-
start the computer and repeat the installation pro-
cedure.