Introduction
1
N1911A/1912A P-Series Power Meters User’s Guide
23
An example of the Web browser is shown in
“N1912A P- Series power
meter Web browser (Welcome Page)”
on page 23.
Figure 1-9
N1912A P-Series power meter Web browser (Welcome Page)
Instrument on the network can be physically identified through the
Status
message on
Remote Interfaces
screen by clicking
Toggle ID
within the
Web browser. This changes the status of the
Instrument ID
to
ON
or
OFF
.
Before the instrument identification starts, press
,
to view the
Status
message.
When
Instrument ID
is toggled to
ON
, this causes the
Status
message
“LAN identify start” in
Remote Interface
screen on the front panel to
blink 3 times. When the
Toggle ID
is selected again, the default
Status
message “Running” is returned. See
Figure 1- 10
and
Figure 1- 11
.
Remote Interfaces
