Using N8480 Series Power Sensors
8
N1911A/1912A P-Series Power Meters User’s Guide
207
•
Use the
and
keys to highlight the
Cal Fac
value field and press
to display the
Cal Factor
pop- up. Use the numeric keypad to enter
97.6 in the
Cal Factor
pop- up window.
• Press
to complete the entry.
• Connect the power sensor to the signal to be measured.
•
The corrected measurement result is displayed.
%
N O T E
When no sensor tables are selected and
display mode is chosen, the
calibration factor used for the measurement is displayed in the upper window as shown in
Figure 8-140
.
Single Numeric
