4
Using E9320 E-Series Power Sensors
148
N1911A/1912A P-Series Power Meters User’s Guide
Setting Offsets
Press .
The
Offsets Setup
screen is displayed.
Figure 4-112
Channel offset display
Use the
,
,
, and
keys to highlight any parameters you want to
change. Press
to configure the required settings. For further detail
on setting these, refer to the appropriate section.
•
Offset
:
“Setting Channel Offsets”
on page 39
•
FDO Table
:
“Setting Frequency Dependent Offsets”
on page 42
Trigger Setup
Press .
The
Trigger
menu is displayed.
The trigger status is displayed below the
label in the
Trigger
menu.
Press the
softkey and add more accuracy to the remaining trigger
parameters, for example, hold- off and hysteresis, to help you achieve a
stable and reliable trigger. Hence, this ensures that the gates you have set
up are capturing the required signal information. See
Chapter 2
, “Setting
the Trigger,” starting on page 66 for further information.
Offsets
Acqn
Settings
